螺纹连接防松技术研究及试验验证

doi:10.3969/j.issn.1009-086x.2021.01.013

现代防御技术 ›› 2021, Vol. 49 ›› Issue (1): 91-97.DOI: 10.3969/j.issn.1009-086x.2021.01.013

螺纹连接防松技术研究及试验验证

黄志强¹, 郑旺辉¹, 金景峰²

1.北京机械设备研究所,北京 100854;
2.陆军装备部装备项目管理中心,北京 100072

收稿日期:2020-05-15 修回日期:2020-08-03 出版日期:2021-02-20 发布日期:2021-03-04
作者简介:黄志强(1989-),男,江西赣州人。工程师,硕士,研究方向为结构设计与仿真。通信地址:100854 北京市海淀区永定路52号院 E-mail:h812696384@163.com

Research and Testing Verification on Anti Loosening of Locking Thread Technique

HUANG Zhi-qiang¹, ZHENG Wang-hui¹, JIN Jing-feng²

1. Beijing Institute of Machinery Equipmenth,Beijing 100854,China;
2. Equipment Project Managment Center of Army Equipment Department,Beijing 100072,China

Received:2020-05-15 Revised:2020-08-03 Online:2021-02-20 Published:2021-03-04

摘要/Abstract

摘要： 螺纹连接以其结构简单、拆装方便、形式多样、连接可靠、互换性好等优点,在机械及各种工程中应用十分广泛,对螺纹连接松动的原因和防松方法进行了概述,介绍了几种新型的螺纹连接方式,同时根据国家标准对相关螺纹连接组合进行了横向振动试验,对试验结果进行了分析,对多种螺纹连接形式是防松效果进行了验证,为工程设计中紧固件选用提供一定的参考依据。

关键词: 螺纹连接, 紧固件, 防松, 新型螺纹, 横向振动试验

Abstract: Thread joint has serveral advantages such as simple structure, convenient dismounting,various format,reliable joint,good interchangeability,therefore it is widely applied in machinery and engineering equipments.The cause and the anti loosening method of thread joint is researched,And several new anti-Loosening methods of thread are introduced.At the same time,some transverse vibration testing are implemented on a group of thread joints according to the national standard.The result of the test proves the anti loosening effect of several thread joint, and provides some reference for thread selecting in structure design field.

Key words: thread joint, fasteners, loose, new type thread, transverse vibration testing

中图分类号:

TJ760.5

黄志强, 郑旺辉, 金景峰. 螺纹连接防松技术研究及试验验证[J]. 现代防御技术, 2021, 49(1): 91-97.

HUANG Zhi-qiang, ZHENG Wang-hui, JIN Jing-feng. Research and Testing Verification on Anti Loosening of Locking Thread Technique[J]. Modern Defense Technology, 2021, 49(1): 91-97.

参考文献

[1] 孔凌嘉,王晓力.机械设计[M].北京:北京理工大学出版社,2009.
KONG Ling-jia,WANG Xiao-li.Machinery Design[M].Beijing:Beijing Institute of Technology Press,2009.
[2] 项忠霞,董刚,林孟霞,等.螺纹联接防松方法的评述[J].机械设计,1996(11):1-2,32.
XIANG Zhong-xia,DONG Gang,LIN Meng-xia,et al.Recitation on Anti-Loosening Methods of Thread Joint[J].Machinery Design,1996(11):1-2,32.
[3] 沈英明,杜彦良,李惠军.螺纹连接防松方法研究综述[J].石家庄铁路学院学报,2002(12):84-87.
SHEN Ying-ming,DU Yan-liang,LI Hui-jun.Research on Anti-Loosening Methods of Thread Joint[J].Journal of Shijiazhuang Railway Institute,2002(12):84-87.
[4] 侯世远,廖日东.螺纹连接松动过程的研究现状与发展趋势[J].强度与环境,2014,41(2):39-52.
HOU Shi-yuan,LIAO Ri-dong.Research Progress on Self-Loosening of Threaded Fasteners[J].Structure & Environment Engineering,2014,41(2):39-52.
[5] 韦增文.浅谈商用车常用螺栓结构及防松能力提升方法[J].汽车技术,2016(5):39-40.
WEI Zeng-wen.Discussion on Common Bolt Structure of Commercial Vehicle and Lifting Method of Anti-looseness Ability[J].Automotive Technology,2016(5):39-40.
[6] 许成良,李志永.关于弹簧垫圈防松性能的探讨[J].制造&检测,2016(7):68-70.
XU Cheng-liang,LI Zhi-yong.Discussion on Spring Washer Locking Performance[J].Manufacturing & Detection,2016(7):68-70.
[7] 莫易敏,王赓,满健康.弹簧垫圈在高强度螺栓连接中的防松性能分析[J].制造技术与机床,2014(9):73-76.
MO Yi-min,WANG Geng,MAN Jiang-kang.A Study of Effects on Anti-Loosening Performance of Automobile High-Strength Threaded Fasteners[J].Machinery Design ＆ Manufacture,2014(9):73-76.
[8] 张嘎.弹簧垫片的防松作用研究[J].研发与开发.2015(2):59-60.
ZHANG Ga.Anti-Loosening Effect of Spring Washer[J].Automobile Parts,2015(2):59-60.
[9] 宋庭锋.某新型螺纹防松垫圈[J].煤矿机械,2012(2):188-189.
SONG Ting-feng.Talking about New Threaded Anti-loosing Washer[J].Coal Mine Machinery,2012(2):188-189.
[10] JG/T 5057.40-1995建筑机械与设备高强度紧固件[S].北京:中国标准出版社,1995.
JG/T 5057.40-1995 Buliding Machine and High-Strength Fasteners Equipment[S].Beijing:China Standard Press,1995.
[11] 苏战波,谢立峰.重型汽车螺栓松动成因与防松探讨[J].汽车实用技术,2016(10):221-223.
SU Zhan-bo,XIE Li-feng.Heavy Duty Truck Bolt Looseness Causes and Locking[J].Automobile Applied Techmology,2016(10):221-223.
[12] 王莉霞,马玉钦,李亚青,等.螺纹连接防松综述[J].贵州工业大学学报(自然科学版),2008,37(6):21-24.
WANG Li-xia,MA Yu-qin,LI Ya-qing,et al.Research on anti-Loosening Methods of Thread Joint[J].Guizhou Institute of Industry Journal(Natural Science ed),2008,37(6):21-24.
[13] 唐宗才.唐氏螺纹:从螺纹结构解决螺纹松动问题[J].机械工程师,2019(3):80-81.
TANG Zong-cai.TANGS Thread:Threaded Structure for Solving Thread Looseness Problems[J].Mechanical Engineer,2019(3):80-81.
[14] 孙峰,唐宗才.唐氏螺纹的防松原理及效果[J].机械工程师,2002(5):13-15.
SUN Feng,TANG Zong-cai.The Anti-Loosing Theory and Effect of TANGS Thread [J].Mechanical Engineer,2002(5):13-15.
[15] GB/T10431-2008紧固件横向振动试验方法[S].北京:中国标准出版社,2008.
GB/T10431-2008 Transverse vibration testing method for fasteners[S].Beijing:China Standard Press,2008.

螺纹连接防松技术研究及试验验证

Research and Testing Verification on Anti Loosening of Locking Thread Technique

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 0

编辑推荐

Metrics

本文评价