现代防御技术 ›› 2021, Vol. 49 ›› Issue (6): 22-28.DOI: 10.3969/j.issn.1009-086x.2021.06.002

• 空天防御体系与武器 • 上一篇    下一篇

杆式杀伤元可控飞散技术研究

张亮, 毛川, 李川, 李俊龙, 高位, 陈华文, 何有为   

  1. 重庆红宇精密工业集团有限公司,重庆 402760
  • 收稿日期:2021-05-11 修回日期:2021-07-23 发布日期:2022-01-12
  • 作者简介:张亮(1972-),男,黑龙江青冈人。高工,硕士,主要从事战斗部设计及研发工作。通信地址:402760 重庆璧山红宇大道九号 E-mail:404826013@qq.com

Research on Controllable Dispersion Technology for Rod Killing Element

ZHANG Liang, MAO Chuan, LI Chuan, LI Jun-long, GAO Wei, CHEN Hua-wen, HE You-wei   

  1. Chongqing Hongyu precision Industry Group Co.,LTD,Chongqing 402760,China
  • Received:2021-05-11 Revised:2021-07-23 Published:2022-01-12

摘要: 为有效控制杆式杀伤元飞散姿态及完整性,结合杆式杀伤元旋转机理,分析了斜置角对杆式杀伤元飞散姿态的影响,得到了对杆式杀伤元飞散姿态可控的产品设计方法;结合杆式杀伤元完整性的理论分析及仿真计算,通过调整杆式杀伤元上的压力分布及能量分配,改善杆式杀伤元上速度矢量分布,减少杆式杀伤元的变形,得到了杆式杀伤元完整性控制方法;开展了杆式杀伤元可控飞散试验,验证了杆式杀伤元飞散姿态及完整性控制方法的有效性。

关键词: 杆式杀伤元, 旋转机理, 完整性控制, 斜置角, 控制模型

Abstract: In order to effectively control the flying attitude and integrity of the rod-type killing element,combined with the rotation mechanism of the rod-type killing element,the influence of the oblique angle on the flying posture of the rod-type killing element was analyzed,and a product design method that can control the flying posture of the rod-type killing element was obtained.Combining the theoretical analysis and simulation calculation of the integrity of the rod-type killing element,by adjusting the pressure distribution and energy distribution on the rod-type killing element,the velocity vector distribution on the rod-type killing element is improved,and the deformation of the rod-type killing element is reduced,the rod-type killing element integrity control method was carried out.The rod-type killing element controllable flying test was carried out to verify the effectiveness of the rod-type killing element flying attitude and integrity control method.

Key words: rod-type killing element, rotation mechanism, integrity control, oblique angle, control model

中图分类号: