双冗余热备份技术的综合控制设备设计与实现

doi:10.3969/j.issn.1009-086x.2018.05.20

现代防御技术 ›› 2018, Vol. 46 ›› Issue (5): 129-134.DOI: 10.3969/j.issn.1009-086x.2018.05.20

双冗余热备份技术的综合控制设备设计与实现

罗悦¹, 陶然², 赵明¹, 李正天¹

1.北京电子工程总体研究所,北京 100854;
2.北京航天自动控制研究所,北京 100854

收稿日期:2017-06-19 修回日期:2017-12-29 出版日期:2018-10-30 发布日期:2020-11-25
作者简介:罗悦(1986-),女,吉林四平人。工程师,硕士,主要从事发射控制技术研究。通信地址:100854 北京市142信箱30分箱17号 E-mail:ygxdl@126.com

Design and Realization of Synthetic Control Equipment Based on Dual Hot Redundancy Technology

LUO Yue¹, TAO Ran², ZHAO Ming¹, LI Zheng-tian¹

1. Beijing Inst.of Electronic System Engineering,Beijing 100854,China;
2. Beijing Aerospace Automatic Control Research Institute,Beijing 1000854,China

Received:2017-06-19 Revised:2017-12-29 Online:2018-10-30 Published:2020-11-25

摘要/Abstract

摘要： 为提高地面装备可靠性,提出一种基于双冗余热备份技术的车载综合控制设备,采用仲裁方式实现状态实时监测及主、备切换功能,同时基于复杂度、可靠性及实现难度考虑,设计一种任务级同步的余度管理方法,通过余度间的通信链路及运行在CPU模块上的任务同步软件模块实现主、备间的任务同步,既满足设备同步需求,同时易于实现,复杂度低。

关键词: 冗余热备, 故障检测, 仲裁切换, 任务, 同步, 可靠性

Abstract: To improve system reliability, a synthetic control equipment with dual CPU hot-redundancy technology is proposed, in which the real time state monitor and switching on master and slave are realized by arbitration. In consideration the complexity, reliability and implementation difficulty, a redundancy management method for task-level synchronization is proposed, which realizes the synchronization of task between the master and slave through the communication link and the task synchronization software running on the CPU module. This method not only meets the device synchronization requirement, but also easy to implement with low complexity.

Key words: hot-redundancy, fault-detection, switching, task, synchronization, reliability

中图分类号:

TJ768

罗悦, 陶然, 赵明, 李正天. 双冗余热备份技术的综合控制设备设计与实现[J]. 现代防御技术, 2018, 46(5): 129-134.

LUO Yue, TAO Ran, ZHAO Ming, LI Zheng-tian. Design and Realization of Synthetic Control Equipment Based on Dual Hot Redundancy Technology[J]. Modern Defense Technology, 2018, 46(5): 129-134.

参考文献

[1] 杜诚谦,潘洁伦.新一代运载火箭地面测试发控系统一体化设计概述[J].航天控制,2004,22(1):55-57.
DU Cheng-qian,PAN Jie-lun.Integrated Design of Ground Test Launch and Control System for New Generation Launch Vehicle[J].Aerospace Control,2004,22(1):55-57.
[2] 陈放,田建宇,王雨萌,等.新一代大型运载火箭热备冗余PLC发控系统设计[J].导弹与航天运载技术,2015(5):96-99.
CHEN Fang,TIAN Jian-yu,WANG Yu-meng,et al.Design of Hot-Standby Redundancy PLC Launch and Control System for the New Generation Launch Vehicle[J].Missiles and Space Vehicles,2015(5):96-99.
[3] 朱朝晖,张崇峰,陈卫东.空间双机容错计算机系统研究[J].上海航天,2004(6):18-23.
ZHU Chao-hui,ZHANG Chong-feng,CHEN Wei-dong.Research on Aerospace Dual-Computer Fault-Tolerant System[J].Aerospace Shanghai,2004(6):18-23.
[4] 王珍熙.可靠性、冗余及容错技术[M].北京:航天工业出版社,1991.
WANG Zhen-xi.Reliability,Redundancy and Fault Tolerance Techniques[M].Beijing:Aerospace Industry Press,1991.
[5] DUTTA S,DUTTA S,BURMAN R,et al.Design and Implementation of a Soft Real Time Fault Tolerant System[C]//Proc.Of IWDC.2002:319-328.
[6] DING H,CHAN SP,A Real-Time Planning Algorithm for Obstacle Avoidance of Redundant Robots[J].Journal of Intelligent and Robotic Systems,1996,16(3):229-243.
[7] 秦友伦,袁强,涂炯,等.一种基于双机热备系统的仲裁切换方案[J].兵工自动化,2015,34(8):56-58.
QIN You-lun,YUAN Qiang,TU Jiong,et al.A Solution of Arbitrary Switch-over Based on Dual-Computer Hot Standby System[J].Ordnance Industry Automation,2015,34(8):56-58.
[8] 沈浩.基于双机热备的控制计算机系统研究与实现[J].工业控制计算机,2011,24(4):29-30.
SHEN Hao.Research and Realization of Control Computer System Based on Dual Hot Standby[J].工业控制计算机,2011,24(4):29-30.
[9] MA Xiu-juan,CAO Xi-bin,MA Xing-rui.Reliability Analysis and Design of On-Board Computer System for Small Stereo Mapping Satellite[J].Journal of Harbin Institute of Technology,2002,9(1):79-81.
[10] 张娟,李赫男,颜华.基于磁盘阵列的双机容错技术[J].南华大学学报,2003,17(2):75-78.
ZHANG Juan,LI He-nan,YAN Hua.Dual Computers' Fault Tolerance Technology Based on RAID[J].Journal of Central-South Institute of Technology,2003,17(2):75-78.
[11] 芶冬荣,刘海清.双机容错计算机系统的设计与实现[J].计算机工程,2008,15(34):255-258.
GOU Dong-rong,LIU Hai-qing.Design and Implementation of Dual-Computer Fault-Tolerant System[J].Computer Engineering,2008,15(34):255-258.
[12] 李宏亮,金士尧,胡华平,等.短事务强实时双机容错系统的研究[J].计算机学报,2003,26(2):244-249.
LI Hong-liang,JIN Shi-rao,HU Hua-ping,et al.A Study of Short Transaction,Hard Real Time Dual Systems[J].Chinese Journal of Computer,2003,26(2):244-249.
[13] PRADHAN D,K,VAIDYA N H.Roll Forward Check Pointing Scheme:A Novel Fault-Tolerant Architecture[J].IEEE Trans.on Computers,1994,43(10):1163-1174.
[14] Fotakis Dimitris A,Spirakis Paul G.Efficient Redundant Assignment Sunder Fault-Tolerance Constrains[J].Lecture Notes in Computer Science,2004,1671:156-167.
[15] 刘东,张春元,李瑞.基于任务同步的双机容错系统[J].计算机工程,2007,33(8):224-226.
LIU Dong,ZHANG Chun-yuan,LI Rui.Dual Fault-Tolerant System Based on Task-Level Synchronization[J].Computer Engineering,2007,33(8):224-226.

双冗余热备份技术的综合控制设备设计与实现

Design and Realization of Synthetic Control Equipment Based on Dual Hot Redundancy Technology

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	宗凯彬, 安飞, 赵文婷, 颜留单, 刘海军. 面向联合作战的美国空军任务式指挥模式探析[J]. 现代防御技术, 2023, 51(3): 66-74.
[2]	马晓东, 朱京来, 胡敏. 防空导弹测试项目规划策略研究[J]. 现代防御技术, 2023, 51(2): 127-132.
[3]	候梦清, 华思亮, 周九州, 郝嘉. 面向实兵交战训练的时间统一技术研究[J]. 现代防御技术, 2023, 51(1): 17-25.
[4]	李迎博, 谭黎立, 王凯旋, 梁卓, 潘彦鹏. 一种基于构件重要度的软件可靠性评估方法[J]. 现代防御技术, 2022, 50(6): 103-109.
[5]	翟芸, 胡冰, 施端阳. 基于改进AHP-熵权法的雷达装备可靠性评估指标赋权方法[J]. 现代防御技术, 2022, 50(4): 148-155.
[6]	陈俊侨, 汪晓军, 崔臣君, 王海岳. 模糊自抗扰的双电机同步驱动电动缸起竖策略[J]. 现代防御技术, 2022, 50(3): 119-126.
[7]	李方俊, 王生捷. 双电机同步消隙伺服系统的鲁棒滑模控制策略[J]. 现代防御技术, 2022, 50(2): 104-112.
[8]	郭毓文, 魏诗朦. 机动转场保障资源规划及验证方法研究[J]. 现代防御技术, 2022, 50(2): 76-83.
[9]	祝昇翔, 何岷, 贺志毅, 王嘉欣. 一种相控阵雷达多通道同步方法[J]. 现代防御技术, 2022, 50(1): 60-66.
[10]	熊娜, 梅天宇, 李飞. 基于区间贝叶斯网络的复杂系统可靠性分析[J]. 现代防御技术, 2021, 49(6): 90-97.
[11]	卞伟伟, 吕鑫, 刘蝉, 贾彦翔, 邱旭阳. 低慢小目标复合拦截任务规划仿真分析[J]. 现代防御技术, 2021, 49(5): 104-110.
[12]	闫浩安, 李建冬. 基于改进神经网络PID的永磁同步电机控制研究[J]. 现代防御技术, 2021, 49(4): 43-48.
[13]	潘楠, 刘海石, 陈启用, 颜礼贤, 郭晓珏. 多基地多目标无人机协同任务规划算法研究[J]. 现代防御技术, 2021, 49(2): 49-56.
[14]	祝华远, 李军亮, 王利明, 王正, 刘剑超. 长周期服役系统可靠性与维修成本评估[J]. 现代防御技术, 2021, 49(2): 86-94.
[15]	蔡应洲, 贺绍飞, 谷振丰, 闫郭伟. 固体火箭空间快速响应任务规划研究[J]. 现代防御技术, 2021, 49(1): 107-115.