现代防御技术 ›› 2020, Vol. 48 ›› Issue (1): 26-31.DOI: 10.3969/j.issn.1009-086x.2020.01.004

• 导弹技术 • 上一篇    下一篇

偏心起爆定向战斗部引战系统设计的几个问题

付斯琴1, 姬聪生1, 姬军鹏2   

  1. 1.北京电子工程总体研究所,北京 100854;
    2.中国人民解放军驻航天科工二院中心军代室,北京 100854
  • 收稿日期:2018-10-31 修回日期:2018-11-13 出版日期:2020-02-20 发布日期:2021-01-20
  • 作者简介:付斯琴(1987-),女,云南大理人。工程师,硕士,主要从事引战系统总体设计方面研究工作。通信地址:100854 北京142信箱30分箱 E-mail:fusiqinbit@163.com

Some Problems in the Design of Fuze Warhead System for Eccentric Priming Directional Warhead

FU Si-qin1, JI Cong-sheng1, JI Jun-peng2   

  1. 1. Beijing Institute of Electronic System Engineering,Beijing 100854,China;
    2. The Central Military Delegate of PLA in the Second Research Academy of CASIC,Beijing 100854,China
  • Received:2018-10-31 Revised:2018-11-13 Online:2020-02-20 Published:2021-01-20

摘要: 针对偏心起爆定向战斗部工程应用上的特点,提出了引战系统设计中需要重点考虑的内容,从目标方位识别、战斗部定向方位划分、安全执行机构体制选择和多点起爆同步性4个方面探讨了引战系统可以采用的技术途径和解决方法,可以为类似引战系统的总体设计提供参考。

关键词: 定向战斗部, 引战系统, 安全执行机构, 目标方位识别

Abstract: Based on the features of eccentric priming directional warhead for engineering applications, the key considerations of designing the fuze warhead system are proposed. The applicable technical solutions and solvations for fuze warhead system are discussed from four directions: target orientation recognition, division of the warhead orientation, selection of safety actuator mechanism, and the synchronization of multipoint initiations. This research can provide the reference for overall design of the fuze warhead system.

Key words: aimed warhead, fuze warhead system, safety actuator mechanism, target orientation recognition

中图分类号: