Matlab实现ADAMS三维随机路面建模

doi:10.3969/j.issn.1009-086x.2018.03.025

摘要/Abstract

摘要： 根据谐波叠加法得到二维随机路面谱,通过改进的谐波叠加法将二维路面谱扩展到三维,形成三维随机路面谱的建模方法。详解了ADAMS中三维随机路面文件的编制规则,通过Matlab编程计算出路面文件中的路面点高程值阵列,生成ADAMS三维随机路面模型文件,仿真计算过程表明路面可用于仿真计算研究。

关键词: 谐波叠加法, 路面谱, 三维路面, 仿真, 建模, 模型文件

Abstract: The 2D random road surface spectrum based on the sinusoid superposition method is built, the modified sinusoid superposition method is used to extend 2D road to 3D for providing the modeling process of 3D random road surface spectrum. The forming rule of 3D random road file in automatic dynamic analysis of mechanical system(ADAMS) is expatiated; the altitude matrix in road file is calculated by Matlab programming and the 3D random road file is generated. Simulation results show its availability in simulation research.

Key words: sinusoid superposition method, road spectrum, 3D road, simulation, modeling, model file

中图分类号:

黄志强, 郑旺辉. Matlab实现ADAMS三维随机路面建模[J]. 现代防御技术, 2018, 46(3): 165-170.

HUANG Zhi-qiang, ZHENG Wang-hui. Modeling of ADAMS 3D Random Road with Matlab[J]. Modern Defense Technology, 2018, 46(3): 165-170.

参考文献 15

[1]	段虎明,石峰,谢飞,等.路面不平度研究综述[J].振动与冲击,2009,28(9):95-101. DUAN Hu-ming,SHI Feng,XIE Fei,et al.Road Roughness Study Summarize[J].Journal of Vibration and Shock,2009,28(9):95-101.
[2]	唐光武,贺学锋,颜永福.路面不平度的数学模型及计算机模拟研究[J].中国公路学报,2000,13(1):115-117. TANG Guang-wu,HE Xue-feng,YAN Yong-fu.Mathematical Model of Road Roughness in Time Domain and Its Simulation[J].China Journal of Highway and Transport, 2000,13(1):115-117.
[3]	AU F T K,CHENG Y S,CHEUNG Y K.Effects of Random Road Surface Roughness and Long-Termd Eflection of Prestressed Concrete Girder and Cable-Stayed Bridges on Impact due to Moving Vehicles[J].Computers and Structures,2001(79):853-872.
[4]	SCHIEHLEN W,HU B.Spectral Simulation and Shock Absorber Identification[J].International Journal of Non-Linear Mechanics,2003(38):161-171.
[5]	周云山,于秀敏.汽车电控系统理论与设计[M].北京:北京理工大学出版社,1999.ZHOU Yun-shan,YU Xiu-min.The Theory and Design of Automobile Electronic Control System[M].Beijing:Beijing Institute of Technology Press,1999.
[6]	徐延海.随机路面谱的计算机模拟[J].农业机械学报,2007,38(1):33-36.XU Yan-hai.Computer Simulation on Stochastic Road Irregularities[J].Transactions of The Chinese Society of Agricultural Machinery,2007,38(1):33-36.
[7]	GB/T7031-1986.车辆振动输入与路面不平度表示方法[S].北京:中国标准出版社,1987.GB/T7031-1986.Vechicle Vibration Imput and Road Rougness Express Method[S].Beijing:China Standard Publishing Company,1987.
[8]	余志生.汽车理论[M].4版.北京:机械工业出版社,2007.YU ZHI-sheng.Automobile Theory[M].4th ed.Beijing:Machinery Industry Press,2007.
[9]	徐昭鑫.随机振动[M].北京:国防工业出版社,1990.XU Shao-xin.Random Vibration[M].Beijing:National Defense Industry Press,1990.
[10]	梁新成,张军,徐瑞.三角级数法的路面重构仿真研究[J].汽车工程学报,2011,1(5):442-447.LIANG Xin-cheng,ZHANG Jun,XU Rui.Study of Road Reconstruction with Trigonometric Series Method[J].Chinese Journal of Automotive Engineering,2011,1(5):442-447.
[11]	吴参,王维锐,陈颖,等.三维路面谱的仿真与验证[J].浙江大学学报:工学版,2009,43(10):1935-1938.WU Can,WANG Wei-rui,CHEN Ying,et al.Simulation and Validation of Three Dimensional Road Surface Spectrum[J].Journal of Zhejiang University:Engineering Science ed,2009,43(10):1935-1938.
[12]	张永林,胡志刚,陈立平.时空相关车辆道路的高效数值仿真[J] .农业机械报,2005,36(9):13-15.ZHANG Yong-lin,HU Zhi-gang,CHEN Li-ping.A New Approach to Numerical Simulation of Vehicle Road Process with Temporal Spatial Correlation[J].Transactions of the Chinese Society of Agricultural Machinery,2005,36(9):13-15.
[13]	赵治.ADAMS/Car软件中随机路面建立方法[J].客车技术与研究,2012(1):11-13.ZHAO Zhi.Method on Building Random Road in ADAMS/Car[J].Bus and Couch Technology Reserch,2012(1):11-13.
[14]	陈军.MSC.ADAMS技术与工程分析实例[M].1版.北京:中国水利水电出版社,2008.CHEN Jun.Examples of Technology and Engineering Analysis by MSC.ADAMS[M].1st ed.Beijing:China Water Conservancy and Hydropower Press,2008.
[15]	郑建荣.ADAMS:虚拟样机技术入门与提高[M].北京:机械工业出版社,2002.ZHENG Jian-rong.ADAMS:Introduction and Improvement of Virtual Prototyping Technology[M].Beijing:Machinery Industry Press,2002.