Fengming LI, Li GUI, Yu QIAN, Shan MA. Correlation Analysis of Suction Position and Corner Separation of Cascade Suction Surface[J]. Modern Defense Technology, 2023, 51(2): 23-32.
JOHNSON M C, GREITZER E M. Effect of Slotted Hub and Casing Treatment on Compressor Endwall Flowfield[J]. Journal of Turbomachinery, 1987, 109(3): 380-387.
2
GREITZER E M. REVIEW-Axial Compressor Stall Phenomena[J]. Journal of Fluids Engineering, 1980: 102(2): 134-151.
3
SUN shijun, CHEN Shaowen, LIU Wei, et al. Effect of Axisymmetric Endwall Contouring on the High-Load Low-Reaction Transonic Compressor Rotor with a Substantial Meridian Contraction[J]. Aerospace Science and Technology, 2018, 81(8): 78-87.
4
MA Shan, CHU Wuli, ZHANG Haoguang, et al. A Combined Application of Micro-vortex Generator and Boundary Layer Suction in a High-Load Compressor Cascade[J]. Chinese Journal of Aeronautics, 2019, 32(5):1171-1183.
5
COSTELLO G R, CUMMINGS R L, SEROVY G K. Experimental Investigation of Axial-Flow Compressor Stator Blades Designed to Obtain High Turning by Means of Boundary-Layer Suction[R]. NACA-RM-E52D18. Washington D C: NACA, 1952.
6
KERREBROCK J L, REIJNEN D P, ZIMINSKY W S, et al. Aspirated Compressors[C]∥ASME Paper No. 97-GT-52, New York, U.S.A, 1997: 1-12.
7
GBADEBO S A, CUMPSTY N A, HYNES T P. Control of Three Dimensional Separations in Axial Compressors by Tailored Boundary Layer Suction[J]. Journal of Turbomachinery, 2008, 130(1): 011004.
8
CHEN Pingping, QIAO Weiyang, Karsten Liesner, et al. Effect of Segment Endwall Boundary Layer Suction on Compressor 3D Corner Separation[C]∥ASME Paper No. G T2015-42024, Montréal, Canada, 2015: 1-10.
9
陈萍萍. 轴流压气机角区分离流动损失机理及流动控制策略研究[D]. 西安:西北工业大学,2015.
CHEN Pingping. Investigations of Corner Separated Flow Loss Mechanism and Its Flow Control Techniques for Axial-Compressors [D]. Xi'an: Northwestern Polytechnical University, 2015.
10
GMELIN C, THIELE F, LIESNER K, et al. Investigations of Secondary Flow Suction in a High Speed Compressor Cascade[C]∥ASME Paper, GT2011-46479, British Columbia, Canada, 2011:405-415.
11
GODARD A, BARIO F, BURGUBURU S, et al. Experimental and Numerical Study of a Subsonic Aspirated Cascade[C]∥ASME Paper No, GT2012-69011, Copenhagen, Denmark, 2012:253-267.
12
DING Jun, WANG Songtao, XU Hao, et al. The Effect of Aspiration Configuration on Aerodynamic Performance in Compound Lean Compressor Cascades of Gas Turbines[J]. Applied Thermal Engineering, 2018, 130(3): 264-278.
13
Hergt Alexander, Meyer Robert, Liesner Karsten, et al. A New Approach for Compressor Endwall Contouring[C]∥Proceedings of ASME turbo expo, Vancouver, British Columbia, Canada, 2011:177-186.
14
SUN Shijun, WANG Songtao, CHEN Shaowen. Design, Modification and Optimization of an Ultra-High-Load Transonic Low-Reaction Aspirated Compressor[J]. Aerospace Science and Technology, 2020, 105(2): 105975.1-105975.14.